Fig. 73R (Lower Molars Right) – English Pattern Dental Extracting Forceps

Product Overview

Fig. 73R (Lower Molars Right) is a professionally designed dental extracting forceps intended for the controlled extraction of right-side lower molar teeth. This instrument belongs to the established English Pattern extracting forceps range and is specifically configured for applications involving mandibular molars on the right side of the dental arch.

The Fig. 73R design provides dental professionals with an instrument specifically differentiated for right lower molar access and handling. Its working ends are shaped to provide appropriate engagement around the target tooth, while the forceps construction is intended to support controlled manipulation during routine dental extraction procedures.

Design and Functional Characteristics

The Fig. 73R incorporates the characteristic configuration associated with English Pattern lower molar extracting forceps. The instrument is designed around the anatomical and access requirements associated with mandibular molar extraction.

Important functional characteristics include:

• Right-side lower molar configuration
• English Pattern design
• Dedicated application for mandibular molars
• Purpose-oriented working jaws for controlled tooth engagement
• Ergonomic forceps-style handle configuration
• Suitable for professional dental environments
• Designed for repeated clinical use when properly maintained and sterilized
• Available as part of a broader family of English Pattern extraction instruments

The dedicated right-sided configuration differentiates Fig. 73R from Fig. 73L, which is designated for left lower molars. Catalogs also distinguish Fig. 73R from the general Fig. 73 lower-molar forceps.

Right Lower Molar Application

Mandibular molars have anatomical characteristics that require appropriate instrument selection during extraction procedures. A forceps intended for the right side can provide the operator with a configuration suited to positioning around the relevant tooth.

The Fig. 73R is specifically catalogued for right lower molars, making it an appropriate instrument within a professional extraction-forceps set where side-specific mandibular molar instruments are required.

Its use should always be determined by the treating dental professional following examination of the tooth, surrounding structures, root anatomy, periodontal condition, and overall clinical circumstances.

Professional Dental Use

Fig. 73R is intended for use in professional dental settings such as:

• Dental clinics
• Dental hospitals
• Oral surgery departments
• Dental teaching institutions
• Dental laboratories and instrument supply environments
• Professional dental practices
• Dental instrument sets and surgical trays

The instrument is intended for use by qualified dental professionals with appropriate knowledge of tooth extraction techniques and dental instrumentation.

Instrument Handling

Correct handling is an important component of safe and effective dental instrumentation. The Fig. 73R should be handled according to the manufacturer’s instructions and the clinical facility’s established protocols.

Before use, the dental professional should inspect the instrument for:

• Proper alignment
• Smooth operation
• Condition of the working ends
• Surface integrity
• Signs of corrosion or damage
• Any deformation or excessive wear
• Cleanliness and sterilization status

Damaged or improperly functioning instruments should not be used.

Cleaning and Sterilization

As with reusable dental extraction instruments, Fig. 73R should be cleaned, processed, and sterilized according to the manufacturer’s validated instructions and the applicable infection-prevention requirements of the healthcare facility.

After a procedure, appropriate instrument reprocessing should be performed without unnecessary delay. Cleaning should remove visible contamination before sterilization. Particular attention should be given to joints, working surfaces, serrations or gripping areas, and other locations where biological material may accumulate.

Where the manufacturer specifies particular cleaning agents, temperatures, exposure times, lubrication procedures, or sterilization methods, those instructions should be followed.